MasterPlumbers.com is FREE to join! Click here to join and gain access to Members Only areas and benefits.
Help Removing Tub Spout Remains
Topic: Help Removing Tub Spout Remains
Posted: 27-Feb-2012 at 6:13pm
Hi there -
I am a landlord, not a plumber, but thought it should be simple enough to replace a universal tub spout with a new one.
Unfortunately this thing had been in a place for a long time and wasn't budging no matter what I tried, so I took a hacksaw to it. Now I still can't seem to remove the part of the spout body which is threaded onto the end of the pipe.
Any advice how to get this off without screwing up anything else?
A photo is at the URL below - (I could not get it to embed here)
|Post Options Quote Reply Posted: 15-May-2012 at 4:54am|
It looks like you have a 1/2" sweated copper male-threaded adapter onto which the pot-metal tub spigot (the part you hackswaed out) was screwed. If so, don't try to use a pipe wrench to twist it apart. You'll need to heat up the male adapter with a torch to melt the solder and caefully pull the adapter off with Channel-Lock pliers. Then snad down and clean the end of the horizontal copper pipe section, resolder on a new male adapter, and then screw on the replacement spigot.
Looks like there is a lot of corrosion at the end of the pipe, and hopefully its just at the end where the old spigot was attached.
If you are careful, you won't damage the proximal ends of the connection, but don't count on it. If you can't fix it using my suggested technique, you'll have to get behind the tub somehow. The best way to do that would be to get access to the wall behind the tub.
|Post Options Quote Reply Posted: 16-May-2012 at 9:23am|
You can also tie thick cloths for the spout.
|Forum Jump||Forum Permissions
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum