New Posts New Posts RSS Feed - crane kitchen sink
  FAQ FAQ  Forum Search   Events   Register Register  Login Login

Topic Closedcrane kitchen sink

 Post Reply Post Reply
Author
bc View Drop Down
Guest
Guest
Direct Link To This Post Topic: crane kitchen sink
    Posted: 08-Nov-2000 at 8:41am
i need a faucet to fit an old crane kitchen queen sink.it needs seperate valves and a low rise 10"-12" spout. the valves mount on a 45 degree angle on the backsplash.the spout come out of the back of the backslash aganst the wall . any help greatly appreciated.
Back to Top
Scott Bryan View Drop Down
Senior Member
Senior Member


Joined: 31-Jan-2000
Location: Roslyn, Pa. USA
Points: 135
Direct Link To This Post Posted: 09-Nov-2000 at 6:44am
although complete faucets for the Crane kitchen queen sink are no longer available many of the original parts are. What is the problem with the original faucet?

Scott www.plumbingpartsdepot.com

Back to Top
bc View Drop Down
Guest
Guest
Direct Link To This Post Posted: 09-Nov-2000 at 7:01am
the spout is leaking where it swivles and there is some sort of epoxy actually holding the spout to the sink ,i guess the nut beneath the sink is gone or broken. the finish on the spout is in bad shape.I am using kolher valves for the supplies and they are fine, i just need a spout that looks and works better,and will actually bolt down to the sink.
Back to Top
bc View Drop Down
Guest
Guest
Direct Link To This Post Posted: 09-Nov-2000 at 8:38am
The spout on the orignal faucet is in bad shape .It leaks at the swivel point and the whole spout is attached to the sink with some sort of epoxy.I guess the nut under the sink broke at some point. The finish on the spout is in bad shape and there is no airator on the end of the spout.
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down